Painting by Josh team had a 3-4 hour gap in the morning prior to the doctor’s practice opening to complete a brick transformation. I’ve certainly noticed a rising trend in painting brick – but man does it look good in Dulux’s Wash & Wear low-sheen white on white. Of course, the only way is to spray – see the photos below for some behind-the-scenes of this project.

This was also my very first time with my hands on the new Graco Contractor PC hand-piece. GO Industrial gave one of the first guns to me to test and put it through its paces.

Following a 5am start, we masked up all surfaces that didn’t need spraying. Once completed – two coats of Dulux Wash & Wear white-on-white was applied with sufficient time to dry in between.

This was the result after first coat!

See a few behind-the-gun photos to see how brick is sprayed!

Part of our client’s requirements were for the existing reception desk to be re-painted in a gloss black.

After allowing the brick to dry – time for second coat. Backrolling after spraying the second coat is necessary to press the paint into the grout between brick.

And finally – the result. We worked very quickly while maintaining the highest of quality finish. After clean-up, the practice opened normal-time… meaning a job well done.